E-12 Installing Windows 2000Graphics Accelerator DriverInstall Graphics Accelerator Driver mounted in Standard.1. Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.2. Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer]3. Run "SETUP.EXE" in the following directory.:\WINNT\VIDEO\RADEON7000\W2K\SETUP.EXE* Install the graphics accelerator driver in the following directory if you communicateyour server with the remote KVM console. (Optional advanced remote managementcard (N8115-02) must be installed in your server to use the remote KVM console.):\N8115-02\VIDEO\RADEON7000\SETUP.EXE4. Follow the message to continue the installation.If the dialog message "Digital Signature could not been found." appears, select [Yes] tocontinue.If the dialog message "Direct X Ver.8 isn't installed." appears, select [continue] tocontinue.5. Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive, follow thedirection on the screen and restart the system.USB 2.0 DriverUSB 2.0 Driver is pre-installed. When restoring the system or re-installing the system, the driver isautomatically installed in the process of updating the system.SETTING FOR COLLECTING MEMORY DUMP(DEBUG INFORMATION)Set for collecting memory dump using the procedure described in Chapter 5.
