9-20 Upgrading Your ServerDrive CoverOpen the drive cover when installing/removing a fan assembly, processor, and backup file device orreconnecting an internal cable.Removal1. See the section "Preparing for Installation and Removal" described earlier to prepare.2. Pull out the server from the rack.3. Slide the drive cover toward the rear of the server while pressing the lock button on thecover.4. Lift off the drive cover from the server.InstallationWhen installing the drive cover, confirm that the tab of the cover is securely inserted into the slot inthe server frame.Slide the drive cover toward the rear of the server. The drive cover is locked when a distinct "click"is heard. At this time, check the release button for normal state.
