6-4 Installing and Using UtilitiesNEC EXPRESSBUILDER for DOS-Based with Local ConsoleThis subsection describes the procedures for using NEC EXPRESSBUILDER for DOS-based withlocal console.Starting NEC EXPRESSBUILDERThe following procedure instructs you to start NEC EXPRESSBUILDER.IMPORTANT: Do not remove the NEC EXPRESSBUILDER CD-ROM while NEC EXPRESSBUILDER is running.1. Turn on peripheral devices and the server in this order.2. Insert the NEC EXPRESSBUILDER CD-ROM supplied with your server into the CD-ROM drive of your server.3. Ensure that the floppy disk drive is empty.4. Press the RESET switch or press Ctrl, Alt, and Delete to reboot from the NECEXPRESSBUILDER. (You may also turn off and then on again to reboot the server.)NEC EXPRESSBUILDER boots up displaying the top menu.
