InMail-Cascade Message NotificationDescriptionIf an extension user receives a new message in their mailbox, Cascading Message Notification will callthem at up to five preset destinations to let them know a new voice mail message has arrived. Adestination can be an outside number (such as a cell phone, pager, or home office) or a co-worker'sextension.The Cascading Message Notification destinations are set up in the Notification Schedule. Each of thefive schedule entries can be individually enabled or disabled and provides options for:• Type: Voice call or pager.• Start Hour: The time the destinations become active.• End Hour: The time the destinations become inactive.• Day of Week: Enables or disables day of week. (V2.0 or higher)• Number: The destination telephone, pager, or extension number.• Busy Attempts: The number of times the system will try the destination when it is busy. The systemcancels notification callouts for this entry when the Busy Attempts number is met.• RNA Attempts: The number of times the system will try the destination when it is unanswered. Thesystem cancels notification callouts for this entry when the RNA Attempts number is met.• Security: Enables or disables the Security Code requirement for the notification destinations. Forexample, you may want to disable the Security Code when the destinations is your cell phone and itmay be inconvenient to dial digits after answering the notification callout.When the extension user enables Cascading Message Notification, the system will try each enableddestination that is active for the current day (V2.0 or higher) and time (i.e., in-schedule). The systemwill not try any destinations that are disabled or are not in-schedule. When the retries for a particulardestination have been met the system will immediately move to the next destination.Conditions• Retry Interval timers are set on a system wide basis only.• The pager dial string is set on a system wide basis only.• Notification settings can be changed using the Telephone Mailbox Option Interface or systemprogramming only.• When the retries for a particular destination have been met the system will immediately move to thenext destination even if there is only one destination active.• Once the notification process begins, a new message does not restart the process if it is already inprogress. Once the process ends (e.g., if the message is acknowledged or the maximum number ofcallout attempts is reached), the next new message will restart the process.• The system determines which numbers are internal extensions or external numbers by the systemdial plan settings.• Depending on the system ARS routing maybe needed to properly route external calls.• If no trunks are available when an outside destination is attempted it is counted as a Busy NoAnswer attempt.• In addition to User Pro, when language prompt Version 2.30 or higher is installed on the InMail CF,the Cascade Message Notification Day of Week schedule options can be set from the mailboxtelephone interface.ISSUE 2.0 SL1100Features and Specifications Manual 1-379I
