Room MonitorDescriptionRoom Monitor lets an extension user listen to the sounds in a co-workers area. For example, thereceptionist could listen for sounds in the warehouse when it is left unattended. To use Room Monitor,the initiating extension and the receiving extension must activate it.When using Multiline Terminals for monitoring, an extension user can Monitor only one extension at atime. However, many extensions can Monitor the same extension at the same time. However, onlyone Single Line Terminal can monitor another Single Line Terminal at a time.Room Monitor for Single Line TerminalsThis option enables you to monitor the room status through your Single Line Terminals. BetweenMultiline Terminals, the monitored room status is picked up by the telephone microphone and theactivity is heard through the speaker of the monitoring Multiline Terminal. Between Single LineTerminals, at the station to be monitored, a user goes off-hook and dials a service code and theextension number of the monitoring telephone. At the monitoring station, a user goes off-hook anddials a service code and the extension number of the monitored telephone. The activity of the areawhere the monitored telephone is placed can then be heard at the monitoring telephone. This serviceis available until the handset of the monitored telephone is placed on-hook.Room Monitor by intercom call (DSX Base)• Room Monitor can simply start by calling Room Monitored set terminal. During Room monitoring bypressing Talk softkey at monitoring terminal both way talk is available. Adding both way talk,monitored terminal can make conference call by Talk softkey if multiple terminals are monitoring.To provide this feature, following PRG need to be set On.PRG 20-13-55: Intercom call to room monitor (COS of Room Monitored)PRG 20-13-11: Room MonitoringPRG 20-13-12: Room Monitored• Setup for Room Monitored terminal is simply pressing DND key plus Mon softkey or pressing DNDkey plus dialing 5.• Room Monitored terminal can display the Monitoring extension number on it's LCD.• Only Multiline Terminal can be set as Monitored terminal. IP Multiline Terminal or SLT are notsupported.• When Monitored terminal canceled the monitored condition by pressing DND key plus dialing 0 orpressing the Function key, Monitoring terminal setting also cleared automatically.WARNING: The use of monitoring, recording, or listening devices toeavesdrop, monitor, retrieve, or record telephone conversation or other soundactivities, whether or not contemporaneous with transmission, may be illegal incertain circumstances under federal or state laws. Legal advice should besought prior to implementing any practice that monitors or records anytelephone conversation. Some federal and state laws require some form ofnotification to all parties to a telephone conversation, such as using a beeptone or other notification methods or requiring the consent of all parties to thetelephone conversation, prior to monitoring or recording the telephoneconversation. Some of these laws incorporate strict penalties.ISSUE 2.0 SL1100Features and Specifications Manual 1-635R