• 1st name and 2nd name are searched separately, if both are detected the 1st name data isdisplayed.• Pause between 1st and 2nd name is determined by “ ” (space), “.” (period) or “-” (hyphen).• When press “Short cut number 211 - 219”, 21*, according to the number “A” to “J” will be indicatedon LCD automatically as first search character.• Below shows Directory dialing (DSX) mode indication.1st line, left corner:1st line, right corner:2nd line:ޓ3rd line:Shortcut codePosition and total size of searched resultCursorName211:Searchޓ 1/122ADAM SMITH_Soft Key mode (DSX)• Standard mode or Advanced mode can be selected by setting PRG 15-02-60. When PRG 15-02-60is set to Standard mode.• Soft Key mode (DSX) is set at PRG 15-02-60: Mode2 and can be entered by depressing Center keywhen the terminal is idle.• At Soft Key (DSX) mode, after pressing “menu” Soft Key then by dialing number of specific featuredirectly, menu screen can move to required feature. See the table shown below for dial number ofeach feature.Table 1-54 Movement on screen from MenuDial pad Changing Menu screenDial 1 0 Volume PreferenceDial 1 1 Volume: RingDial 1 2 Volume: Off Hook RingDial 2 0 Display PreferencesDial 2 1 Display: ContrastDial 2 2 Display: Minimum BrightnessDial 2 3 Display: Maximum BrightnessDial 3 0 Feature PreferencesDial 3 1 Feature: Voice AnnounceDial 3 2 Feature: Handsfree ReplyDial 3 3 Feature: Automatic Call TimerDial 3 4 Feature: Hot DialpadDial 3 5 Feature: Illuminated DialpadDial 3 6 Feature: Auto Call screeningDial 3 7 Feature: Incoming PageDial 3 8 Feature: Ringing Line PrefDial 3 9 Feature: Auto BacklightDial 4 0 Ring PreferencesDial 4 1 Ring Tone Config: IntercomDial 4 2 Ring Tone Config: Line KeysDial 4 3 Ring Tone Config: Each Line KeysSL1100 ISSUE 2.01-536 Navigation KeyN
