Facsimile CO Branch Connection 1 - 489FFacsimile CO Branch ConnectionDescriptionThe UNIVERGE SV8100 system provides branch connection of locally provided facsimilemachines to CO/PBX lines. Additional dedicated CO/PBX lines are not required for afacsimile to operate. The facsimile shares any CO/PBX line on the COI Package and PowerFailure (PF) circuit.Conditions This function requires a CD-4COTB Package to connect a facsimile in branch toa direct CO/PBX line. A PF circuit is required. The CD-4COTB has PF circuits on the first two ports. PF and FAX branch connection does not work together at the same port. Selecteither way in Program 14-02-21. For the FAX Branch Line, Incoming Group or DIL should be programmed. The systems cannot distinguish between an incoming facsimile call and a CO/PBX call. Incoming call may be automatically answered by FAX Machine.Ringing assignments should be turned off for fax lines. When the facsimile is used, the associated CO line key indicates Busy LED on amultiline terminal. When the facsimile is not used, the Fax Branch CO/PBX line can be used as anoutside line. Code restriction does no apply to outgoing calls from the Fax machine. Connection of the facsimile machine does not require extra system ports. The PZ-4COTx blade does not contain any Power Fail or Fax Branch Exchangecircuits. Power Fail and Fax CO Branch Connection cannot be used on the same COport at the same time. Program 14-02-21 must be used to set a CO port to use this feature.Default SettingsNone
