UNIVERGE SV8100 Issue 5.0Selectable Display Messaging 1 - 861Selectable Display MessagingDescriptionAn extension user can select a preprogrammed Selectable Display Message for their extension. Displaymultiline terminal callers see the selected message when they call the user’s extension. SelectableDisplay Messaging provides personalized messaging. For example, an extension user could select themessage GONE FOR THE DAY. Any display multiline terminal user calling the extension may hear aDND signal and then see the message. See table below for a list of the standard messages.An extension user can add digits for date, time or telephone number after messages 1~8 and 10 (up to24 characters). For example, an extension user could select the message ON VACATION UNTIL andthen enter the date. Callers see the original message followed by the appended date. They could thentell when the user is coming back from vacation. The system allows all telephones to use the SelectableDisplay Messaging feature at the same time.All telephones are able to use Selectable Display Messaging at one time.The default messages are:Conditions The # cannot be used in a Message. When Selectable Display Messaging is set as DND All, all other DND modes are canceledTable 1-17 Selectable Display Messaging DefaultsNo. Message Change “#” to...1234567891011~20IN MEETING UNTIL ##:##MEETING ROOM - ########COME BACK ##:##PLEASE CALL ############BUSY CALL AFTER ##:##OUT FOR LUNCH BACK ##:##BUSINESS TRIP BACK ##/##BUSINESS TRIP ##########GONE FOR THE DAYON VACATION UNTIL ##/##MESSAGE 11~20Time (when meeting done)Room Name or extensionTime (when returning)11 digits (telephone number)Time (when returning)Time (when returning)Date (when returning)10 digits (where reached)Date (when returning)
