UNIVERGE SV8100 Issue 5.0Hold 1 - 571OperationSystem HoldTo place an outside call on System Hold:Press Hold.20-11-10 Class of Service Options (Hold/Transfer Service) – Group HoldAnswerIn an extension Class of Service,enable (1) or disable (0) anextension ability to pick up a callplaced on Group Hold (ServiceCode 862).0 = Off1 = On(default = 1 forCOS 1~15)20-11-13 Class of Service Options (Hold/Transfer Service) – OperatorTransfer After Hold CallbackTurns Off or On an extensionability to have a call which recallsfrom Hold transfer to the operator.0 = Off1 = On(default = 0 forCOS 1~15)20-17-01 Operator Extension – Operator’sExtension NumberDefine the extension numberswhich are to be used by operators.Up to eight digits(default = 101)24-01-01 System Options for Hold – HoldRecall TimeSet the Hold Recall Time. A callon Hold recalls the extension thatplaced it on Hold after this time.0~64800 (seconds)(default = 90 seconds)24-01-02 System Options for Hold – HoldRecall Callback TimeSet the Hold Recall Callback Time.A trunk recalling from Hold ringsan extension for this time.0~64800 (seconds)(default = 30 seconds)24-01-03 System Options for Hold –Exclusive Hold Recall TimeSet the Exclusive Hold RecallTime. A call on Exclusive Holdrecalls the extension that placed iton Hold after this time.0~64800 (seconds)(default = 90 seconds)24-01-04 System Options for Hold –Exclusive Hold Recall CallbackTimeSet the Hold Recall Time. A trunkrecalling from Hold rings anextension for this time. If stillunanswered, the call changes toSystem Hold.0~64800 (seconds)(default = 30 seconds)24-01-05 System Options for Hold –Forced Release of Held CallSet the Forced Release of HeldCalls interval. If enabled inProgram 14-01-16, the systemdisconnects a call if on Hold longerthan this interval.0~64800 (seconds)(default = 1800seconds)ProgramNumber Program Name Description/Comments Assigned Data
