1369Warning Tone for Long ConversationDescriptionWThe system can broadcast warning tones to a trunk caller, warning the caller that hehas been on the call too long. If he chooses, the caller can disregard the tones andcontinue talking. The outside caller does not hear the warning tones. Warning tones do notoccur for Intercom calls and most incoming trunk calls. DISA trunks can also have warningtones. Warning tones are not available to analog single line telephone (SLT) users.There are two warning tones: Alarm Tone 1 and Alarm Tone 2. AlarmTone 1 is the first set of tones that occur after the user initially places atrunk call. Alarm Tone 2 broadcasts periodically after Alarm Tone 1 as acontinued reminder. Each alarm tone consists of three short beeps.If programmed, DISA calls are disconnected unless the continue code isentered by the user. With the Long Conversation Cutoff feature, incomingor outgoing central office calls can also be disconnected.Warning Tone for DISA CallersFor DISA callers, with this feature enabled, the warning tone timer beginswhen an incoming DISA call places an outgoing call and either the inter-digit timer expires or the outgoing call is answered.If an outside call is transferred to forwarded off-premise using an outsidetrunk, the warning tone timer begins immediately. This occurs only if eithertrunk involved in the call is programmed for this feature (Program 14-01-17). When transferring a trunk call off-premise, Program 14-01-13 mustbe enabled (set to 1).ConditionsWarning Tone for Long Conversation does not occur for incoming trunk calls.Warning Tone for Long Conversation occurs for all outgoingtrunk calls, regardless of how they are placed or otheroutgoing restrictions.Warning Tone for Long Conversation can be enabled for DISA calls.W
