882Mobile Extension - Callback to Cell PhoneDescriptionCallback to Cell Phone allows the user to make an incoming call to a system then hang up before thesystem answers (like a one ring call), then the system calls back to the calling Cell Phone using apre-programmed number. The advantage is to reduce Cell Phone charges for calls on a mobileextension system.After receiving a call back on a Cell Phone, the user can call another extension or make an outgoing callvia the system using the mobile extension function.Example – Callback to Cell PhoneConditionsMobile Extension must be programmed for this feature to work.In the Callback to Cell Phone feature set Program 15-22-04 to 1. If the Cell Phone usercontinues to ring over the time set in Program 22-01-12, the system answers the call as anormal Mobile Extension call.Callback to Cell Phone will not proceed and no retry is made if all trunks are busy whentrying to callback.Callback trunk routing follows Program 15-22-03 setting. When set 0 (Normal trunk accesscode), ARS also can be used.If Mobile Extension does not answer the Callback within time set in Program 20-01-16,Callback will stop. If answered the within the Callback time, the user hears an extensiondial tone. A splash tone is not heard.If the system receives a “Disconnect” from the far end after a Callback is made, Callbackwill stop.When Calling party number is used, Callback follows the Program 21-19-01 outgoing callsetting of the Mobile Extension which made the outgoing call.The Callback to Cell Phone feature is not supported when using an analog trunk.
