475Facsimile CO Branch ConnectionDescriptionThe UNIVERGE SV9100 system provides branch connection of locally providedfacsimile machines to CO/PBX lines. Additional dedicated CO/PBX lines are notrequired for a facsimile to operate. The facsimile shares any CO/PBX line on theCOI Package and Power Failure (PF) circuit.ConditionsThis function requires a GCD-4COTA Blade to connect a facsimile inbranch to a direct CO/PBX line.A PF circuit is required. The GCD-4COTA has PF circuits on the first two ports.PF and FAX branch connection do not work together at the same port.Select either way in Program 14-02-21.For the FAX Branch Line, Incoming Group or DIL should be programmed.The systems cannot distinguish between an incoming facsimile call anda CO/PBX call. Incoming call may be automatically answered by FAXMachine. Ringing assignments should be turned off for fax lines.When the facsimile is used, the associated CO line key indicatesBusy LED on a multiline terminal.When the facsimile is not used, the FAX Branch CO/PBX line can beused as an outside line.Code restriction does no apply to outgoing calls from the FAX machine.Connection of the facsimile machine does not require extra system ports.The GPZ-4COTE daughter board does not contain any Power Fail orFAX Branch Exchange circuits.Power Fail and FAX CO Branch Connection cannot be used on thesame CO port at the same time.Program 14-02-21 must be used to set a CO port to use this feature.Default SettingsNoneSystem AvailabilityTerminalsNoneRequired Component(s)F
