306Cordless Telephone ConnectionDescriptionWhen using an APR-L for DTL telephones a cordless telephone (2500-type) can be connected to amultiline terminal.The GCD-4LCF with GPZ-4LCF Daughter Board, GCD-8LCF with GPZ-8LCF Daughter Board alsosupport cordless telephones, but this feature refers to multiline terminal cordless connection.ConditionsA voice announced internal call to the multiline terminal does not ring the cordlesstelephone.Only one cordless single line telephone can be connected to an APR-L Unit.When CO Prime Line is assigned to the associated multiline terminal, internal dial tonecannot be transferred to the cordless telephone.The cordless telephone requires a PBR circuit while dialing. When all PBR circuits are busy,a busy tone is heard when the phone goes off-hook.Depending on your environment, the maximum number of cordless devices used withoutinterference varies.This feature works with 2500-type cordless single line telephones.The multiline terminal user and the associated cordless telephone user cannot talk to eachother.An APR-L Unit with hookflash enabled follows the same operating procedures as a single lineterminal connected to a GCD-4LCF with GPZ-4LCF Daughter Board or GCD-8LCF with GPZ-8LCF Daughter Board.The multiline terminal LCD displays normal information for multiline terminal when acordless terminal is used.When the multiline terminal user goes off-hook before the cordless single line telephoneuser, a PBR circuit is not connected for the cordless single line telephone.The cordless telephone must be installed within 10 feet of the APR-L Unit.The following features are supported by an APR-L:Initiate conferenceChange station namePrivacy release by pressing line keyGroup ListenDSS/BLF indicationHeadset RingingThe APR-L only support DTMF signaling, DP (Dial Pulse) is not supported.
