47Ancillary Device ConnectionDescriptionAncillary Device Connection allows installation of selected peripheral (ancillary) devices to a multilineterminal. This feature enhances peripheral device objectives.An UNIVERGE SV9100 multiline terminal user can accomplish this by using the AP(R)-R/APR-L Unit(Analog Port Adapter with Ringer) or AP(A)-R Unit (Analog Port Adapter without Ringer) for analogtelephone devices, or installing the AD(A)-R/APA-L Unit to connect devices such as tape recorders.The AP(A)-R/AP(R)-R/APA-L Units are the interface for installing a single line telephone, Modem, creditcard reader, wireless headset, NEC Conference Max Conferencing unit or other compatible analogdevice.The PSA-L Unit (Power Save Adapter), an optional adapter for the ITL/DTL Terminals, is used to makeor receive a call using the Public Switched Telephone Network (PSTN) when a call cannot be made withthe ITL/DTL extension.ConditionsThe optional device fits underneath the terminal.A single line telephone connected to an AP(R)-R Unit or AP(A)-R Unit cannot performTrunk-to-Trunk Transfer and does not support a conference with itself and two outsideparties.A single line telephone connected to an AP(R)-R Unit or AP(A)-R Unit does not supportMessage Waiting Indication or Caller ID Indication.An AP(R)-R Unit (analog port adapter with ringer) can be installed on a multiline terminaland function separately from the multiline terminal.When Program 10-03-06 is assigned as APR you cannot manually assign a port number for anAPR. The system uses ports 193~256 (starting with 256 and working down) for a total of64 APR ports. APR 1 uses port 256, and APR 2 uses port 255, and so on.When Program 10-03-06 is assigned as APR you cannot manually assign a port number forthe APR.Phones that have an APR/APA installed do not pass voice to a trunk until the interdigit timeexpires (Program 21-01-03).When a single line phone is connected to an AP(R)-R or APR-L, a conference cannot beestablished unless the 2nd channel of ESI is used for APR in Program 10-03-06 andProgram 10-03-07.When a single line phone is connected to an AP(R)-R or APR-L, the 2nd channel of ESImust be used (Programs 10-03-06 and 10-03-07) to switch back and forth between a calland call waiting.APR-L does not support DTL-2E-1, DTL-6E-1, DTZ-2E, DTZ-6DE or all ITZ/ITL stylephones.ADA-L can send confirmation sound to far end, but the recording machine must generateconfirmation sound.
