4-30 Using Your NEC VersaParallel DevicesTo install a parallel device, such as a printer, you need acable with a male 25-pin connector for the system and, forsome parallel printers, a Centronics®-compatible 36-pinconnector.NOTEWhen you connect a printer, be sure to installthe appropriate printer driver through the WindowsControl Panel.Connect a parallel device to your NEC Versa as follows.1. Check that both the NEC Versa and parallel devicepower are off.2. Open the port cover on the back of the system and locatethe parallel port.3. Align and connect the 25-pin parallel cable connector tothe parallel port on the system. Secure the cable with thescrews provided.4. Align and connect the other end of the cable to the paral-lel port on the device. Lock the connector clips.
