2-8 Introducing the SoftwareHow to Use LapLinkFollow these steps to get started using LapLink. Once youhave LapLink up and running, refer to the LapLink onlinehelp for more information.1. Start LapLink as follows: In Windows for Workgroups, locate and double clickthe LapLink group icon. Select Laplink for Win-dows. In Windows 95, press Start, slide the cursor to Pro-grams, and locate the LapLink for Windows 95folder. Highlight the LapLink line and press the Ver-saGlide selection button or tap the VersaGlide padonce.If you do not have a port enabled, LapLink promptsyou to enable one. Press Yes to do so and follow theon-screen instructions to configure the port. Other-wise, press No.2. Once your ports are configured, select your communica-tion method by pressing the appropriate button. Thebuttons give you the following connection options. Connect over cable Connect over wireless Connect over modem (if installed) Connect over network Connect over dial-up networkOnce communication is established between systems, theLapLink window is displayed.3. Select the procedure you want to use by pressing one ofthe last three buttons in the LapLink toolbar at the top ofthe screen.
