Getting Started 1-25! CAUTIONSThis equipment uses an ungrounded power cable.Replace the cord if it becomes damaged. U.S. andCanadian replacement cords must be UL-approved(CSA certified in Canada) type SPT-2, 18 AWG, 2-conductor cord with a permanently attached NEMAtype 5-15P plug at one end, and a permanently at-tached connector body on the other. Cord lengthmay not exceed 15 feet. Outside the U.S. and Can-ada the cord must be rated for at least 250VAC at10 amps, and must indicate international safetyagency approval. The plug must be a type appro-priate for the country where it is used.Obtain replacement cords at an authorized servicecenter. The replacement must be of the same typeand voltage rating as the original cord.Disconnect all supply lines before the expansionmemory slot cover is removed. Replace the expan-sion memory slot cover before the unit is restarted.Storage RequirementsStore the computer and AC adapter in an environment thatmeets the following conditions: Maintain storage temperatures between –20°C and 60°C(–4°F and 140°F).
