1-4 Getting StartedBrightness or Contrast ControlDepending on the model of LCD panel the slide bar locatedto the right of the LCD panel controls brightness or con-trast. Slide the bar up or down to adjust screen brightness,if you have a TFT panel. Side the bar up or down to adjustcontrast for a DSTN panel.Additionally models with DSTN-type screens, may use Fnkey for the following results: Fn-F1 decreases LCD brightness. Fn-F2 increases LCD brightness.Power Button and Status LEDsNEC Versa systems offer the following features on thehinge just under the LCD panel:Power Button — The Power button turns NEC Versa 2600power on and off. Press the button to turn power on; pressit again to turn power off. When power is on, the PowerLED lights. See “Setup Parameters” in Chapter 3 to usethis button as a Suspend/Resume buttom.NOTEAfter turning off the system, wait 5 secondsbefore turning it back on. This gives system compo-nents a chance to power down properly. Power and Status LEDs (identified by icons) are foundto the right of the Power button, and inform you of thestatus of your system and its components. Status LEDshave the following meanings and light under the condi-tions noted:
