Napoleon Attitude AX42NTE Installation Manual

Also see for Altitude AX36NTE: Owner's manual Installation manual Installation manual

Contents

Napoleon Attitude AX42NTE Installation Manual Manual pdf 27 page image

ENW415-1935 / A / 05.07.19 27electrical informationIt is necessary to hard wire this appliance.This appliance must be electrically connected and grounded in accordance with local codes. In the absenceof local codes, use the current CSA C22.1 Canadian Electrical Code in Canada or the ANSI/NFPA 70 NationalElectrical Code in the United States.L1 (Black)L2(White)Cable connectorElectrical boxcoverGround(Green)Screw ElectricalboxWire nuts(Black)Ground(Green)(White)3 prongreceptacle5.0 electrical information5.1 hard wiring connection5.2 receptacle wiring diagram5.3 electronic wiring diagram! WARNING• Do not use this appliance if any part has been under water. Call a qualified service technician immediately tohave the appliance inspected for damage to the electrical circuit.• Risk of electrical shock or explosion. Do not wire 110V to the valve or to the appliance wall switch. Incorrectwiring will damage controls.• All wiring should be done by a qualified electrician and shall be in compliance with local codes. In theabsence of local codes, use the current CSA22.1 Canadian Electric Code in Canada or the current NationalElectric Code ANSI/NFPA NO. 70 in the United States.• Always light the pilot whether for the first time or if the gas supply has run out, with the glass door opened orremoved.5.4 eFIRE Controller applicationNapoleon’s eFIRE application will revolutionize the way you use your fireplace! We have cracked the code andpresent to you the first fireplaces to be controlled by Bluetooth technology, using an intuitive app on your mobiledevice.When fully equipped (if applicable), the eFIRE application allows you to select from a multitude of colours to suityour mood or décor simply by scrolling through the colour wheel. Additionally, Napoleon’s eFIRE application allowsyou to control many other functions of your fireplace, including on/off, flame height, light feature, blower, and atimer to create a schedule for your fireplace that works for you.Using the instructions on the eFIRE Controller application website http://napoleonfireplaces.com/efire, installthe application and enjoy the features the eFIRE Controller application has to offer. ** Visit the website or contact your authorized dealer for appliance-specific information and/or frequently askedquestions regarding features and products available with the eFIRE Controller application.note:The remote control is considered the master control for the appliance and can always be used to turn theappliance off (ex. the eFIRE Controller application user, in control of the appliance, leaves the home).