Napoleon Attitude AX42NTE Installation Manual

Also see for Altitude AX36NTE: Owner's manual Installation manual Installation manual

Contents

Napoleon Attitude AX42NTE Installation Manual Manual pdf 34 page image

W415-1935 / A / 05.07.19EN34finishing• Risk of fire!• Never obstruct the front opening of the appliance.• The front of the appliance must be finished with any non-combustible materials such as brick, marble, granite,etc., provided that these materials do not go below the specified dimension, as illustrated.• Do not strike, slam, or scratch. Do not operate appliance with glass removed, cracked, or scratched.• Facing and/or finishing material must never overhang into the appliance opening.• The glass door assembly is designed to pivot forward when relieving excess pressure that might occur. Finishingor other materials must not be located in the opening surrounding the door as this will interfere with the doorsability to relieve pressure.! WARNING9.0 finishingThis appliance does not include decorative brick panels, however, panels are required. Panel kits are sold sepa-rately. Consult your local authorized dealer / distributor. Refer to the ‘replacement parts’ section.9.1 decorative panels! WARNING• Failure to position the logs in accordance with these diagrams or failure to use only logs specifically approvedwith this appliance may result in property damage or personal injury.• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, sinceappliance may not function properly and delayed ignition may occur.• The logs are fragile and should be handled with care.PHAZERTM logs and glowing embers exclusive to Napoleon, provide a unique and realistic glowing effect that is dif-ferent in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect. Logcolours may vary. During the initial use of the appliance, the colours will become more uniform as colour pigmentsburn in during the heat activated curing process. Blocked burner ports can cause an incorrect flame pattern.Driftwood log set Oak log setAX36 AX42Refer to leaflet provided with kit for log placement instructions.9.2 log placementIF SPACE IS LEFT OVER, USE THIS BOX TOSHOW CORRECT FINAL LOG PLACEMENTWITH LINE DRAWINGS.IF NOT, USE BOXES AS ABOVE.