136 System messages and MMI commands descriptionTable 18Fiber Peripheral Controller selftest HEX codes (cont’d.)HEX code Test description0D A31 #1 internal context memory (phase A)0E A31 #1 internal context memory (phase B)0F A31 #1 internal TXVM memory10 A31 #1 configuration memory11 A31 #1 external FIFO12 A31 #2 external buffer13 A31 #2 internal context memory (phase A)14 A31 #2 internal context memory (phase B)15 A31 #2 internal TXVM memory16 A31 #2 configuration memory17 A31 #2 external FIFO18 R72 N-P switching control memory19 R72 320x8 NIVD buffer1A R72 N-P Quiet code register1B R72 P-N switching control memory1C R72 640-8 XIVD buffer1D R72 640-8 XIVD loopback buffer test1E R72 P-N Quiet code register1F R71 register test20 R71 continuity test, peripheral side21 R71 continuity test, network side22 R71 packet transmission test23 Interrupt test24 R71 continuity test, peripheral side DS30XTable 19Alphabetical list of MMI commandsCommand DescriptionCLOGClears the log file and deletes all the messages.CXSM For remote floor-standing column. Checks thecommunication between the Fiber Peripheral Controllerand the system monitor in the pedestal. The output is:Wait... during the test and after the test it displays: XSMresponding or XSM not responding.Nortel Communication Server 1000Fiber Remote IPE FundamentalsNN43021-554 04.01 4 June 2010Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
