Remote Annex Administrator’s Guide for UNIXChapter 2 Configuration ParametersBook C-118Book Ctype_of_modemThis asynchronous port parameter defines a 16-byte string that specifiesthe modem type connected to the port. The modem type indexes a modemdescription table that is loaded into the Annex at boot time. This stringmust match the type_of_modem field in the modem section of the lastread configuration file; otherwise, the Annex logs a warning message.The Annex also logs warnings when connecting to a port with anunrecognized value in type_of_modem.For more details on using the configuration file and modem management,see Parsing the Configuration File on page A-345 and Creating modemEntries in the Configuration File on page A-374.user_nameThis asynchronous port parameter defines an asynchronous port’s username as a string. The CLI who command displays this value; the CLIrlogin command passes this value to a host. The default is a null string("").vcli_groupsThis Annex parameter specifies which LAT remote group code isassigned to virtual CLI users. All virtual CLI users have the same groupcode. Values are specified as a series of numbers separated by commas(e.g., 1,5,7) or a range of numbers separated by a dash (e.g., 200-255).Following the range, specify the keyword enable or disable. Allowablevalues are all, none, or numbers between 0 and 255. Following the range,specify the keyword enable or disable. The default is none enable.
