Book C-51Chapter 2 Configuration ParametersRemote Annex Administrator’s Guide for UNIXBook Cchar_eraseWhen this asynchronous port parameter is enabled, the Annex echoesboth the character erase and the word erase characters for a videoterminal; i.e., the previous character (or word) looks as if it has beenerased. A Y enables this parameter, an N disables it. The default is Y.When char_erase is disabled, the Annex echoes the erase characters fora hard-copy terminal. It echoes the first erase character as a “\” followedby the deleted character. Each additional use of the erase character deletesand displays another character. The first character typed (other than theerase character) echoes a “/” and the character, e.g., typing“asdfg” echoes as “asdf\fd/g.”This parameter has effect only at the CLI level.circuit_timerThis Annex parameter defines the time interval in tens of millisecondsbetween the transmission of LAT packets (e.g., if you enter 9, the timeinterval will be 90 milliseconds). Allowable values range from 1 to 25.The default value is 8 (80 milliseconds).cli_imask7When this asynchronous port parameter is enabled, the Annex masks CLIinput to seven bits. The Annex masks input only at the CLI. Whencli_imask7 is disabled, the Annex expects eight-bit ASCII input. A Yenables this parameter, an N disables it. The default is Y.
