124 Chapter 7 WAN screensNN47922-500Table 24 describes the fields in Figure 32.Table 24 Dial Backup SetupLabel DescriptionEnable Dial Backup Select this check box to turn on dial backup.Basic SettingsLogin Name Type the logon name assigned by your ISP.Password Type the password assigned by your ISP.Retype to Confirm Type your password again in this field.Authentication Type Use the drop-down list to select an authentication protocol foroutgoing calls. Options are:CHAP/PAP - Your Business Secure Router accepts eitherCHAP or PAP when requested by this remote node.CHAP - Your Business Secure Router accepts CHAP only.PAP - Your Business Secure Router accept PAP only.Primary/ SecondaryPhone NumberType the first (primary) phone number from the ISP for thisremote node. If the Primary Phone number is busy or does notanswer, your Business Secure Router dials the SecondaryPhone number, if available. Some areas require dialing thepound sign # before the phone number for local calls. Include a# symbol at the beginning of the phone numbers as required.Dial Backup Port Speed Use the drop-down list to select the speed of the connectionbetween the Dial Backup port and the external device. Availablespeeds are: 9 600, 19 200, 38 400, 57 600, 115 200 or 230 400b/s.AT Command InitialStringType the AT command string to initialize the WAN device.Consult the manual of your WAN device connected to your DialBackup port for specific AT commands.Advanced ModemSetupClick this button to display the Advanced Setup screen andedit the details of your dial backup setup.TCP/IP OptionsPriority (Metric) This field sets this route's priority among the three routes theBusiness Secure Router uses (normal, traffic redirect and dialbackup). Type a number (1 to 15) to set the priority of the dialbackup route for data transmission. The smaller the number,the higher the priority.If the three routes have the same metrics, the priority of theroutes is as follows: WAN, Traffic Redirect, Dial Backup.Get IP AddressAutomatically fromRemote ServerType the logon name assigned by your ISP for this remotenode.
