Chapter 5 System screens 85Nortel Business Secure Router 222 Configuration — BasicsPredefined NTP time server listThe Business Secure Router uses the predefined list of NTP time servers listed inTable 11 if you do not specify a time server or if it cannot synchronize with thetime server you specified.The Business Secure Router can use this predefined list of time servers regardlessof the Time Protocol you select.Client User Setting The client user is the person who uses the Business SecureRouter's Contivity Client VPN tunnel.The client user can do the following:• Configure the WAN ISP and IP screens.• Configure the VPN Contivity Client settings (except theAdvanced screen’s exclusive use mode for client tunnel andMAC address allowed settings).• View the SA monitor.• Configure the VPN Global Setting screen.• View logs.• View the Maintenance Status screen.• Use the Maintenance F/W Upload and Restart screens.User Name Type a username for the client user (up to 31 characters).New Password Type a password for the client user (up to 31 characters). Notethat as you type a password, the screen displays a (*) for eachcharacter you type.Retype to Confirm Retype the client user password for confirmation.Apply Click Apply to save your changes to the Business SecureRouter.Reset Click Reset to begin configuring this screen afresh.Table 10 PasswordLabel Description