Chapter 13 VPN 221Nortel Business Secure Router 222 Configuration — BasicsID type and content examplesTwo VPN switches must have matching ID type and content configuration inorder to set up a VPN tunnel.The two Business Secure Routers shown in Table 54 can complete negotiation andestablish a VPN tunnel.E-mail Type an e-mail address (up to 31 characters) by which to identify thisBusiness Secure Router.The domain name or e-mail address that you use in the Content field is used foridentification purposes only and does not need to be a real domain name or e-mailaddress.Table 53 Peer ID type and content fieldsPeer ID type= Content=IP Type the IP address of the computer with which you make the VPNconnection or leave the field blank to have the Business SecureRouter automatically use the address in the Secure Gateway field.DNS Type a domain name (up to 31 characters) by which to identify theremote VPN switch.E-mail Type an e-mail address (up to 31 characters) by which to identify theremote VPN switch.The domain name or e-mail address that you use in the Content field is used foridentification purposes only and does not need to be a real domain name or e-mailaddress. The domain name also does not have to match the remote VPN switch’s IPaddress or what you configure in the Secure Gateway Address field below.Table 54 Matching ID type and content configuration exampleBusiness Secure Router A Business Secure Router BLocal ID type: E-mail Local ID type: IPLocal ID content: tom@yourcompany.com Local ID content: 1.1.1.2Peer ID type: IP Peer ID type: E-mailPeer ID content: 1.1.1.2 Peer ID content:tom@yourcompany.comTable 52 Local ID type and content fieldsLocal ID type= Content=
