Chapter 20 Logs Screens 375Nortel Business Secure Router 222 Configuration — BasicsTable 102 describes the fields in Figure 151.Table 102 Log settingsLabel DescriptionAddress InfoMail Server Enter the server name or the IP address of the mail server forthe e-mail addresses specified below. If this field is left blank,logs and alert messages are not sent via e-mail.Mail Subject Type a title that you want to be in the subject line of the loge-mail message that the Business Secure Router sends.Send Log To Logs are sent to the e-mail address specified in this field. If thisfield is left blank, logs are not sent via e-mail.Send Alerts To Alerts are sent to the e-mail address specified in this field. Ifthis field is left blank, alerts are not sent via e-mail.Syslog Logging Syslog logging sends a log to an external syslog server used tostore logs.Active Click Active to enable syslog logging.Syslog Server IPAddressEnter the server name or IP address of the syslog server thatlogs the selected categories of logs.Log Facility Select a location from the drop-down list. In the log facility, youcan log the messages to different files in the syslog server.Refer to the documentation of your syslog program for moredetails.Send LogLog Schedule This drop-down menu is used to configure the frequency of logmessages being sent as e-mail:DailyWeeklyHourlyWhen the Log is FullNoneIf you select Weekly or Daily, specify a time of day when thee-mail will be sent. If you select Weekly, you must also specifywhich day of the week the e-mail is to be sent. If you selectWhen Log is Full, an alert is sent when the log fills up. If youselect None, no log messages are sent.Day for Sending Log Use the drop-down list to select which day of the week to sendthe logs.Time for Sending Log Enter the time of the day in 24-hour format (for example 23:00equals 11:00 p.m.) to send the logs.