Ethernet interfaces 1039Media storageFixed media driveThe fixed media drive (FMD) is a CompactFlash (CF) card that is internalto the CP PM card. It is accessible only when the CP PM card is removedfrom the system. The FMD serves as a hard drive. The Fixed Media Driveis used when CP PM is a Call Server. It is connected directly to the ATAcontroller in the chipset, which is also known as the hard drive controller.Removable media driveThe removable media drive (RMD) is a hot swappable CF card accessiblefrom the CP PM faceplate. The CS 1000 software is shipped on a CF cardand is loaded onto the CP PM through the RMD. This drive is also used fordata backups.Hard disk driveThe CP PM hardware can be used as a platform for the CS 1000 SignalingServer. When deployed as a signaling server, the CP PM platform isequipped with a hard disk drive.Note: The hard drive must have its jumper set for CSEL operationbefore installation.Memory The memory controller in the Intel 855 GME graphics memory controller hub(GMCH) supports one channel of DDR 200/266/333 (PC1600/2100/2700)with error correcting code (ECC). The maximum capacity of the controller is2GB. The main memory is comprised of two 200-pin SO-DIMM modules.This facilitates future upgrades.Ethernet interfacesThere are three Ethernet network interfaces on a CP PM card: HSP, TLANand ELAN. The network interfaces are application specific.ELANThe ELAN network interface is a 10/100 BaseT port. By default this portis set to autonegotiate. This network interface is used for both Call Serverand Signaling Server applications.HSPThe HSP is a 10/100/1000 BaseT network interface that provides standbyCall Server redundancy. By default this network interface is set toautonegotiate.Nortel Communication Server 1000Circuit Card ReferenceNN43001-311 01.04 StandardRelease 5.0 23 May 2008Copyright © 2003-2008, Nortel Networks.
