Man-Machine T1 maintenance interface software 239Set ClearingUse the Set Clearing (S C) command set to enable or disable alarmself-clearing. Answer Y or N to the question: "Enable Self Clearing? (YESor NO)". If "Enable Self-Clearing" is chosen (the factory default condition),the system automatically clears alarms after the alarm condition is no longerdetected for the corresponding duration period.The "Disable Self-Clearing" option causes the system to continue thealarm condition until the Clear Alarm (C A) command set is entered. Lineprocessing and the yellow alarm indication to the CPE is terminated as soonas the alarm condition clears, even if "Disable Self-Clearing" is set.Display ConfigurationThe Display Configuration (D C) command set displays the variousconfiguration settings established for the Lineside T1 card. Entering theDisplay Configuration (D C) command set causes a screen similar to thefollowing to appear:LTI S/N 1103 Software Version 1.01 3/03/95 1:50Alarms Enabled: YES Self Clearing Enabled: YESAlarm Level 1 threshold value: E-7 Threshold duration(in seconds): 10Alarm Level 2 threshold value: E-5 Threshold duration(in seconds): 1Frame slips alarm level threshold: 5 Threshold duration(in hours): 2Current dip switch S1 settings (S1..S8) On Off Off On OffOff Off OnCurrent dip switch S2 settings (S1..S8) On Off On Off OffOff On OffThe MMI has been designed with default settings so that no configuration isnecessary. However, it can be configured to suit a specific environment.Set TimeBefore configuring the MMI, login to the system and enter the current time.Do this by typing in the Set Time (S T) command set. The MMI then displaysthe time it has registered. Enter a new time or press "Enter" to leave itunchanged. The time is entered in the "hh:mm:ss" military time format.Set DateThe current date must be set. Do this by typing in the Set Date (S D)command set. The MMI then displays the date it has registered. Enter anew date or press "Enter" to leave it unchanged. The date is entered inthe "mm/dd/yy" format.Nortel Communication Server 1000Circuit Card ReferenceNN43001-311 01.04 StandardRelease 5.0 23 May 2008Copyright © 2003-2008, Nortel Networks.
