Installation 287Figure 60LEI card - connecting two or more cards to the MMITerminal configurationFor the MMI terminal to be able to communicate to the LEI, the interfacecharacteristics must be set to:• speed – 1200 or 2400 bps• character width – 7 bits• parity bit – mark• stop bits – one• software handshake (XON/XOFF) – offSoftware ConfigurationAlthough much of the architecture and many features of the LEI card aredifferent from the analog line card, the LEI has been designed to emulate ananalog line card to the CS 1000 software. Because of this, the LEI softwareconfiguration is the same as for two adjacent analog line cards.Nortel Communication Server 1000Circuit Card ReferenceNN43001-311 01.04 StandardRelease 5.0 23 May 2008Copyright © 2003-2008, Nortel Networks.
