CHAPTER 3 REPAIR PROCEDURES3.1.4 InCal Weight Hardware Disassembly & Testing4. Lift off the InCal Weight Cover. It does not have screws.Figure 3-14. The InCal Weight Cover sitsbeneath the Display Cable Shield Plate.Note:A clean glove should be worn when handling Weights.Figure 3-15. Weights and Weight Holders can beremoved, but should only be handled whilewearing a clean glove.5. Remove both Weights and Weight Holders, and set them aside.6. Carefully remove any dust or debris from the Weights, Weight Holders, and theirenvironment, using alcohol on a clean cloth.Discovery Balance Service Manual 3-11 Ohaus Corporation www.ohaus.com
