CHAPTER 3 REPAIR PROCEDURES3.2.2 Load Cell Disassembly18. Remove the Up/down Stop Plate that controls the Ratio Beam’s movement.Figure 3-53. Up/Down Stop Plate. Figure 3-54. Removing TemperatureConductor.19. Remove the Temperature Conductor, as shown in Figure 3-53.20. Remove the two screws that secure the Magnet Cover, and carefully remove theMagnet Cover by lifting it straight up.Figure 3-55. Removing screws that securethe Magnet Cover. Figure 3-56. Lifting off the Magnet Cover.Ohaus Corporation www.ohaus.com 3-28 Discovery Balance Service Manual
