OHAUS Explorer Pro Instruction Manual

Also see for EXPLORER PRO: Service manual Instruction manual Instruction manual

EN-12 ExplorerPro3.4 ApplicationsThe Explorer Pro balance contains Weighing, Parts Counting,Animal Weighing, Percent Weighing, Check Weighing, G/N/T andFilling applications. Before using any of these applications, theymust be turned on first before they can be accessed. A choicecan be made to turn on or off as many of these applications asrequired. The balance default setting has the weighing modeturned on and all other modes are off.To select applications to be turned on or off, press the Menubutton and using the arrow buttons, scroll to Application Modes,then press the Enter button.MENUCalibrationBalance OptionsR eadoutApplication ModesUnitsInterfacePrint OptionsG LP Print OptionsLockoutFactory R esetExitAPP LICATION MODE SWeighing : OnParts Counting : OffAnimal Weighing : OffPercent Weighing : OffCheck Weighing : OffG/N/T : OffFilling : OffExitBy pressing the Enter button and using the arrow buttons, eachitem on the Application Modes screen can be turned on or off.When finished, press the Menu button, the balance returns toweighing mode. All settings are saved.To use any of the modes that have been turned on, press theMode button repeatedly to cycle through all of the applicationmodes.3.4.1 WeighingThe Explorer Pro balance is shipped with grams only enabled.The balance can be used immediately after calibration has beenperformed. When the balance is to be used with other units ofmeasure, the desired unit must be enabled.USEZero the balance. Place objects or material to be weighed on thepan. Example indicates a 200 gram weight on a 6100g balance.Wait for the stability indicator to appear before reading the weight.WEIGHING 01/01/03 03:05:45: PMU NIT S 2nd U NIT S CA L IB R ATE200.00 g* 0.00g0g 6100gWEIGHING WITH A CONTAINERWith no load on the pan, zero the balance.Place an empty container on the pan. Its weight is displayed.Tare the balance. The container’s weight is stored in memory.Add material to the container. As material is added, its net weightis displayed.Removing the container and material from the pan will cause thebalance to display the container’s weight as a negative number.The tared container weight will remain in memory until the balanceis zeroed again or the balance is turned off.