ExplorerPro EN-193.4.4 Animal WeighingAnimal weighing permits you to weigh small animals and filtersout animal movements. Choices of manual, semi automaticand automatic operation is possible.The display data includes the filtered weight of the animal inselected unit of measurement, and unfiltered weight of the animalin 2nd unit of measurement, filter level, mode of operation and abar graph indicating present used capacity of the balance.ANIMA L WEIGHING 01/01/03 03:05:45 PMFI L TE R S ET U P S TA R T0.00 gFilter: LowMode: Manual0g 6100gPlace animal, Press EnterADJUSTMENTSThe ANIMAL WEIGHING display contains three soft keys at thetop of the screen FILTER, SETUP and START/CLEAR .START/CLEARSelect the START soft key and press the enter button to start theanimal weighing process. The soft key is changed to CLEAR andallows the weight to be cleared when the Enter button is pressed.SETUPSelect SETUP soft key and press the Enter button. The ANIMALWEIGHING SETUP display is shown.USEANIMAL WEIGHINGPlace the animal on the pan. With the START soft key highlighted,press the Enter button. The display performs a count down toaverage out the weight. The weight is indicated as shown andremains on the display.ANIMA L WEIGHING 01/01/03 03:05:45 PMFI L TE R S ET U P C LEA R2038.73 gFilter: L owMode: Manual0g 6100g* 2038.73 gRemove the animal from the pan. With the CLEAR soft keyhighlighted, press the Enter button to clear the weight. The balanceis now ready for another measurement. To change the mode ofoperation from manual to semi automatic or automatic andchange filtering levels, refer to Adjustments.ANIMA L WEIGHING S ET UPUnit : g2nd Unit : gFilter : L owMode : ManualDisplay S ettings : CustomFilter Key : UnlockedExitUnit: g, kg, etc...(default is g)Cycles through all units turned on in the Units menu.2nd Unit: g, kg, etc...(default is g)Cycles through all units turned on in the Units menu.Filter: Low, Medium, High (default is Low)Can be set one of three filtering levels. A higher level filter willprovide more accurate measurement.Mode: Manual, Semi, Auto (default is Manual)One of three modes can be set.Manual ModeWeighing process starts manually. After placing animal on panwith soft key START highlighted, press the Enter button. Screendisplay retains reading and is manually cleared by pressing theEnter button when soft key CLEAR is highlighted.Semi Automatic modeWeighing process starts automatically as soon as the animal isplaced on the pan. When the animal is removed, the displayretains the weight reading. The balance must be cleared manuallyby pressing the Enter button.