OHAUS Explorer Pro Instruction Manual

Also see for EXPLORER PRO: Service manual Instruction manual Instruction manual

ExplorerPro EN-25Languages: English, Spanish, etc...(default is English)Allows the selection of English, Spanish, French, German or Italianas the operating language to be displayed.Display Date/Time: Time, date, etc...(default is Date/Time)Allows display selection of Time, Date, Date/Time or Off in theupper right-hand corner of the Application Mode screen.Date Format: MM/DD/YY, YY/MM/DD, ETC...(default is MM/DD/YY)Allows setting of one of six date formats: MM/DD/YY,YY/MM/DD , DD/MM/YY, DD/YY/MM, MM/YY/DD or YY/DD/MM.Date: OO/00/00 (default is none)Allows setting the present date.Time Format: 12 Hour, 24 hour(default is 12 Hour)Allows setting the time format of either 12 hours or 24 hours.Time: 00:00:00 (default is none)Allows setting the present time of hours, minutes and AM/PM.Valid numbers change with time format from 1->12 to 0->23.When in 24 hour mode, no AM/PM flag appears.Contrast:Allows adjusting the contrast level of the display.Brightness:Allows adjusting the brightness level of the display.Audible Signal: On, Off (default is Off)With audible signal set On, each button press will generate atone.Exit:When selected, returns to previous screen.3.5.3 ReadoutPress the Menu button, and select Readout.Press the Enter button. The READOUT screen is displayed.READO UTFilter L evel : MediumS tability L evel (d) : 1.0Auto Z ero (d) : 0.5Auto Tare : OffL egal for Trade : OffExitFilter Level: Low, Medium, High (default is Medium)Sets the balance reading averaging level to a value of Low,Medium or High. A higher filter level will provide a more repeatablemeasurement.Stability Level: 0.5, 1.0, etc... (default is 1.0)Sets the balance stability level for the stability indicator to either0.5, 1.0, 2.0 or 5.0. A 0.5 setting is equivalent to end result of.5 display digit. A 5.0 setting is equivalent to end result of 5display digits.Auto Zero: Off, 0.5, etc... (default is 0.5)Sets the balance auto zero level to either Off, 0.5, 1.0, 2.0 or5.0. Auto Zero tracking compensates for the drift at zero load.0.5d means 0.5 display digit drift compensation per second.5.0d means 5 display digit drift compensation per second.Auto Tare: On, Off (default is Off)Sets the Auto Tare function to On or Off. This feature providesauto tare in all application modes. When Auto Tare is On, thebalance waits for the container/load to be placed on the pan andautomatically tares it. This function is repeated for each newcontainer/load.Legal for Trade: On, Off (default is Off)Sets the Legal for Trade (LFT) function either On or Off. Refer toparagraph paragraph 3.5.11 for additional information.