EN-20 ExplorerProANIMA L WEIGHING 01/01/03 03:05:45 PMFI L TE R S ET U P S TA R T0.00 g0g 6100g*Filter: LowMode: Manual3.4.5 Check WeighingCheck weighing is used when items are checked against presetbalance parameters. This feature permits you to weigh an item,set balance parameters such as the over weight, target weightand under weight. A bar graph at the bottom of the CheckWeighing screen indicates UNDER, ACCEPT and OVER for itemsbeing checked.CHECK WEIGHING 01/01/03 03:05:45 PMU NIT S SET UP CA L IB RATEOver: 15.00 gTarget: 10.00 g Diff: -10.00 gU nder: 5.00 g Diff: -100.00 %O.00 g*U nder Accept OverUSECHECK WEIGHINGBefore using the Check Weighing feature, the Over, Target andUnder limits must be set.ADJUSTMENTSThe CHECK WEIGHING display contains three soft keys at the topof the screen UNITS, SETUP and CALIBRATE.CALIBRATEWhen the CALIBRATE soft key is highlighted, an internal span orspan calibration can be performed depending upon the model.Press the Enter button. Refer to Balance Setting, paragraph 3.5.SETUPSelect the SETUP soft key and press the Enter button. The CHECKWEIGHING SETUP display is shown.Automatic ModeWeighing process starts automatically as soon as the animal isplaced on the pan. The weight is displayed until the animal isremoved. The balance is ready for another animal weighing.Display Settings: Custom, Default (default is Default)Setting the display to Custom allows individual items Filter, Mode,2nd weight to be turned on or off. In the default setting, all itemsare turned on.Filter Key: Locked, Unlocked (default is Unlocked)This feature allows to lock or unlock the Soft key function.ExitWhen selected, returns to Animal Weighing mode.FILTERSelect FILTER soft key and press the Enter button. The display isshown with the Filter: Low highlighted. Pressing the up or downarrow buttons, either Low, Medium or High can be selected, thenpress the Enter button. Low is the default setting. Display isshown. After selection is made, the screen display returns to anAnimal Weighing Mode. A higher filter level will provide a moreaccurate measurement.CHECK WEIGHING S ET U PUnit : gOver : 15.00Target : 10.00Under : 5.00Display S ettings : CustomExit