ExplorerPro EN-27Newton (N): On, Off (default is Off)Unit (N) = g x 0.00980665, displayed readability by 1.MOMME (m): On, Off (default is Off)Unit (m) = g x 0.2666667, displayed readability by 5.Tical (ti): On, Off (default is Off)Unit (ti) = g x 0.0612395, displayed readability by 1.Custom Unit (Cst): On, Off (default is Off)When the Custom Unit is set On, the CUSTOM UNIT screen willappear.This feature can be used to create a custom weighing unit. Itpermits entering a conversion factor which the balance will useto convert grams to the desired unit of measure.Conversion Factor x Grams = Custom UnitUnit (Cst) = g x user set custom factor, displayed resolution cannot exceed resolution in gram.Conversion factors are expressed in scientific notationand entered into the balance in three parts:• Mantissa (0.1 and 1.999999)• Exponent (10E)• Least Significant Digit (LSD)C U S TOM UNITFactor : 1.0Exponents : E1L S D : 1ExitSCIENTIFIC NOTATIONSCIENTIFIC NOTATIONSCIENTIFIC NOTATIONSCIENTIFIC NOTATIONSCIENTIFIC NOTATIONMantissaMantissaMantissaMantissaMantissaBetweenBetweenBetweenBetweenBetweenConv.Conv.Conv.Conv.Conv. 0.1 and Exponent0.1 and Exponent0.1 and Exponent0.1 and Exponent0.1 and Exponent Man-Man-Man-Man-Man- Exp.Exp.Exp.Exp.Exp.FactorFactorFactorFactorFactor 1.9999991.9999991.9999991.9999991.999999 tissa (10tissa (10tissa (10tissa (10tissa (10EEEEE )))))123.4 = .1234 x 1000 =.1234 x 10312.34 = .1234 x 100 = .1234 x 10 21.234 = .1234 x 10 = .1234 x 10 1.1234 = .1234 x 1 = .1234 x 10 0.01234 = .1234 x .1 = .1234 x 10 -1.001234 = .1234 x .01 = .1234 x 10 -2.000123 = .123 x .001 = .123 x 10-3EXPONENTSEXPONENTSEXPONENTSEXPONENTSEXPONENTSE-3 Moves decimal point 3places to the left.E-2 Moves decimal point 2places to the left.E-1 Moves decimal point 1place to the left.E0E0E0E0E0 Leaves decimal point inLeaves decimal point inLeaves decimal point inLeaves decimal point inLeaves decimal point innormal position.normal position.normal position.normal position.normal position.E1 Moves decimal point 1place to the right.E2 Moves decimal point 2places to the right.E3 Moves decimal point 3places to the right.LSD’sLSD’sLSD’sLSD’sLSD’sLSD .5 Adds one decimal placedisplay counts by 5’s.LSD 1 Display counts by 1’s.LSD 2 Display counts by 2’s.LSD 5 Display counts by 5’s.LSD 10 Display counts by 10’s.LSD 100 Display counts by 100’s.3.5.6 InterfacePress the Menu button, and select Interface.Press the Enter button, The INTERFACE screen is displayed.INTE R FACEBaud R ate : 2400Parity : NoneData Bits : 7S top Bits : 2ExitBaud Rate: 300, 1200, etc...(default is 2400)Baud Rate is selectable between 300, 1200, 2400, 4800 or9600 BPS.Parity Bit: None, Odd, Even (default is None)Parity Bit is selectable between None, Odd or Even.Data Bits: 7, 8 (default is 7)Data Bits is selectable between 7 or 8 data bits.Stop Bits: 1, 2 (default is 2)Stop Bits is selectable between 1 or 2 stop bits.Exit:Will return to previous display.