Change the number of staplesIntroductionWhen a job is sent to the machine, a desired number of staples for that job can be indicated.However, you can change the number of staples on the control panel.This section describes how to change the number of staples for a specific job.NOTEThere must be a match between the selected output location and the job requirements. Forexample, when a job does not require staples, you can select any output location. When a jobrequires 1 or 2 staples, you can only select the output locations that can staple the jobs, forexample [Finisher] because the [Stacker] cannot staple the jobs. When you make a combinationthat is not possible, the control panel displays an error message.Procedure1. On the control panel, touch the [Jobs] button.2. In the list of [Waiting jobs] or [Scheduled jobs], touch the job you want to edit.3. Touch [Properties].NOTEYou can also press the job 2 times to access the [Properties] window. This function iscomparable to double-clicking with a mouse.4. Touch the [Binding] button.5. Touch the desired number of staples.6. Touch the desired location of the staples.7. Touch [OK].The [Binding] button shows the currently selected number of staples.Change the number of staples152 Chapter 9 - Carry out print jobs Océ VarioPrint 6000 line
