Load light-weight media into the paper moduleIntroductionIMPORTANT• Before you load media into the paper trays, it is important to unpack and carefully check thestack and sheets.Unpack light-weight media on page 241• Load the media carefully because light-weight media is fragile, especially at the edges.• Some light-weight media can be badly cut. This means that sheets stick to each other. Afteryou loaded the media, loosen the sheets according the instructions below.• Follow the instructions below carefully. When you do not load the media correctly, media ormachine damage can occur.• Discard damaged sheets.Before you begin• Before you load light-weight media into the paper trays, insert the light-weight media tool inthe side slider at the operator side. The light-weight media tool is located in the door of thepaper module.Remove the light-weight media tool when there is no light-weight media loaded in the tray.Place the light-weight media tool in the storage location in the door of the paper module.• Make sure that the grain direction of the media is in the transport direction of the printer.When needed, determine the grain direction, seeDetermine the grain direction of light-weightmedia on page 243• The humidity of the light-weight media is very importantLoad light-weight media into the paper moduleChapter 11 - Media handling 237Océ VarioPrint 6000 line
