Continue with step 2 when you select this option.• Press [Continue].The controller will use the PCL default media and continue the print job.Note that this might be an incorrect media.• Press [Cancel stream].The print job is stopped. You can now solve the problem. It is most likely that you can solve theproblem on the host.NOTESteps 2 and 3 apply only when you chose to assign a media.2. From the list of media, select the media that will be used as the media the controller is asking forand press [OK].Note that this might be an incorrect media.The media will now be displayed with the name that is defined in the media catalog.3. Select the paper tray where you want to load the required media and press [OK].4. Load the media.5. Close the paper tray.6. Press [OK].Now you can assign other media or continue the print job.Handle the media messages - How to handle the [Media message] in the tray-to-media modeProcedure1. A message on the control panel indicates that a media is missing. Select one of the followingactions as a response to the message.• Press [Assign media].Continue with step 2 when you select this option.• Press [Continue].The controller will use the PCL default media and continue the print job.Note that this might be an incorrect media.• Press [Cancel stream].The print job is stopped. You can now solve the problem. It is most likely that you can solve theproblem on the host.NOTEThe following steps apply only when you chose to assign a media.2. From the list of media, select the media that will be used as the media the controller is asking forand press [OK].Note that this might be an incorrect media.3. Select one of the memory locations of the logical-tray table to be used for the required media.Note that the media that was previously allocated to that memory position in the setup will beoverwritten. Then that media will no longer be available to the transaction stream.Now you can assign other media or continue the print job.Handle the media messages - How to handle the [Media message] in the tray-to-media mode186 Chapter 9 - Carry out print jobs Océ VarioPrint 6000 line
