219Preparations for removing the developer stationPreparations for removing the developer stationCaution:Heavy weight:Note the heavy weight of the developer station (approx. 70 kg/145.35 lb) andthe correct functioning of the locks on the replacement cart.Hot surfacesAfter a longer period of printing, the motor of the developer station may behot. Do not touch the motor.Attention:Danger of damageBear in mind the width and height of the replacement cart when moving it.Preparing to remove the developer station[119]Proceed as follows:1. Open the left and right doors at the front of the printing system.2. [264]Open the door in front of thephotoconductor drum:■ Pull the lever forward.
