365Remove torn charge corotron[496]CautionThe nipple on the corotron wire may fall, unnoticed, into the developer sta-tion when removing the charge corotron cartridge. If printing then contin-ues, the developer station can be irreparably damaged.When changing the faulty charge corotron cartridge, always check if thenipple is still on the corotron wire. If the nipple is missing, search for andfind it.3. Check whether the nipple is still on the corotron wire. If the nipple is miss-ing, search for it. To do this, pull out the developer station (see Clean thedeveloper station. on page 273) and search the developer station and the en-tire area around it. If no nipple is found, remove the photoconductor drum(see Removing the photoconductor drum on page 400) and search this area.4. Install charge corotrons on page 363Proceed as follows:
