398 Chapter 9 Replacing expendablesInstalling the heating element and completing replacement of the fuser rollerCompleting the replacement of the fuser roller[216]10. [564]Swivel on oiling unit and turnthe oiling unit knob to the rightto lock it.11. Close the front and side door of the fuser station.Proceed as follows:Proceed as follows:1. Select the inserted fuser roller type on the operator panel.2. Select inserted fuser roller.The fuser roller designation is printed on the packaging.3. Indicate on the operator panel whether a new fuser roller has been fitted:■ When you click on the 'Yes' button:The message is automatically deleted from the operator panel. Replace-ment of the fuser roller is recorded in the 'Consumable history' menu.■ When you click on the 'No' button:The fuser roller was only cleaned, for example. No replacement is record-ed in the 'Consumable history' menu.4. Complete the replacement of the fuser roller on the operator panel:■ Click on the 'OK' button to complete the fuser roller replacement.All units of the printing system are inspected (duration around 2-3 min-utes), before the printing system is switched to the 'Ready' status.
