352 Chapter 9 Replacing expendablesRemove pressure rollerRemove pressure rollerCaution:Observe the safety directives in the section Replacing the pressure roller -overview on page 351.To prepare to remove the pressure roller station[192]To open the doors and flaps and allow the printing system to cool down[193]Proceed as follows:1. If the printing system has not yet stopped, click the 'Stop' button.2. Select the 'VarioStream' 'Changing consumables' 'Replace pressure roller'menu on the operator panel.3. Click the 'OK' button to start the procedure.Information on the icons displayed on the operator panel under 'Work-steps':See Explanation of icons on page 118.4. Cut inserted paper in the paper input at a right angle to the transport deviceand remove from the printing system by continuously pressing the EJECTbutton.Proceed as follows:1. Open the side door of the fuser station.2. [467]Turn the knob of the oiling unitto the left and swivel up the oil-ing unit.
