320 Chapter 8 Replacing consumablesRemoving the fuser oil bottleRemoving the fuser oil bottlePrepare procedure on the operator panel[167]To remove the fuser oil bottle[168]Proceed as follows:1. If the printing system has not yet stopped, click the 'Stop' button.2. Select the 'Changing consumables' 'Replace fuser oil bottle' menu on the op-erator panel.3. Click the 'OK' button to start the procedure.Information on the icons displayed on the operator panel under'Work-steps': see Explanation of icons on page 118.Proceed as follows:1. Open the center door at the back of the printing system.2. Open new fuser oil bottle packaging. Use a knife to make a cross-cut in theseal and prepare the fuser oil bottle.3. [432]Swivel out fuser oil bottle hold-er with the empty fuser oil bot-tle.4. [433]Open the interlock flap and dis-connect the oil suction tubefrom the fuser oil bottle. Wipeaway any residual oil from thetube end on the bottle opening.
