234 Chapter 6 Operating the printing systemFinal tasks for installing the developer stationFinal tasks for installing the developer stationCaution:Heavy weight:Note the heavy weight of the developer station (approx. 70 kg/145.35 lb) andthe correct functioning of the locks on the replacement cart.Hot surfacesAfter a longer period of printing, the motor of the developer station may behot. Do not touch the motor.Attention:Danger of damageBear in mind the width and height of the replacement cart when moving it.To complete the installation of the developer station[124]Proceed as follows:1. [298]Remove the toner suction hoseand vacuum hose from the rub-ber mounting.2. Insert the toner suction hose to the stop point in the developer station.
