GlossaryGlossary-2Printer driverThe printer driver makes it possible for you to print datacreated using application software. The printer driver foreither the printer is on the Kyocera Mita Digital Library CD-ROM supplied with the printer. Install the printer driver onthe computer connected to the printer.RAM diskThis is a virtual disk drive that uses part of the printer’smemory. With RAM disk you can set any memory sizearbitrarily, and use electronic sorting (to reduce print time).Simple Network Management Protocol (SNMP)This is a protocol for the management of networks that useTCP/IP (Transmission Control Protocol/Internet Protocol).Sleep modeThis mode is activated after a specified amount of timeelapses. The printer goes into economy mode and a minimumamount of power is consumed. You can change the amount oftime before the printer goes into sleep mode from the printer’soperator panel. The default setting is 15 minutes.Status pageThis lists printer conditions, such as the printer’s memory,the total number of copies printed, and paper source settings.
