Chapter 1 Using the Operator Panel1-56When the desired mode is displayed, press the EN-TER key.Press the MENU key. The message display returns toReady.In addition to the message displayed when the paper supplyis exhausted, or when paper jamming occurs, an audio warn-ing is made to sound. This is useful, for example, when theprinter is in a location some distance from the user.The audio alarm is set to On.Press the MENU key.Press the or key repeatedly until Others > ap-pears.Press the key.Press the or key repeatedly until > Buzzer ap-pears.Press the ENTER key. A blinking question mark (?)appears.Select On or Off using the or key.Press the ENTER key.Press the MENU key. The message display returns toReady.If an error that still allows you to continue printing occurs(Memory overflow Press GO, Print overrun PressGO, KPDL error Press GO, File not found Press GO,RAM disk error Press GO, MemoryCard err PressGO,and Hard disk err Press GO), the next receiveddata is automatically printed after a set period of time elaps-es. For example, if the printer is shared over a network as anetwork printer and one person causes one of the above er-rors, after the set period of time elapses, the data sent fromthe next person is printed. The default setting is On (AutoContinue).For setting the auto continue recovery time, see the next sec-tion.Press the MENU key.Press the or key repeatedly until Others > ap-pears.Press the key.Press the or key repeatedly until > AutoContinue Mode > appears.Press the ENTER key. A blinking question mark (?)appears.Select On or Off using the or key.Press the ENTER key.Press the MENU key. The message display returns toReady.Setting (Buzzer) AlarmOthers >>BuzzerOn>Buzzer? On7812345678Setting Auto ContinueNOTEOthers >>Auto Continue >Mode Off>Auto ContinueMode ? Off12345678
