Chapter 1 Using the Operator Panel1-39Double click Model Name on the list. The jobs cur-rently stored in the printer are shown. To print thejob, right click Job name and then click Print on thedrop down list that appears.It is possible to select more than one job at a time byright clicking a job one by one while pressing theShift key on the computer keyboard.The job remains intact even after printing. To permanentlydelete the job in the hard disk, right click the job name on JobManager, then click Delete on the drop down lost that ap-pears.Printing a List of Code JobsIf you select permanent job storage on the printer driver, youcan have a list of code job printed using the operator panel.A sample Code Job List is shown below.Press the MENU key.Press the or key repeatedly until e-MPS > ap-pears.Press the key.Press the or key repeatedly until >List ofCode JOB appears.Press the ENTER key. A question mark (?) appears.Press the ENTER key again. The printer prints aCode Job list as shown below.You can store a job in the virtual mailbox. Specify the virtualmailbox as destination through the printer driver. You canprint the stored jobs from the operator panel.Jobs stored in the virtual mailbox are deleted when printingis completed.Printing Data Stored in Virtual Mailbox (VMB)To retrieve and print the jobs posted in the virtual mailbox,proceed as follows.Press the MENU key.Press the or key repeatedly until e-MPS > ap-pears.Press the key.Press the or key repeatedly until >Print VMBData appears. The virtual mailbox number will alsoappear.If you have named the virtual mailbox with an aliason the printer driver, the alias (Richard, in thisexample) will follow the number:e-MPS >>List ofCode JOB>List ofCode JOB ?512345Using Virtual Mailbox (VMB)e-MPS >>Print VMB DataTray001:>Print VMB DataTray001:Richard6PERMANENT CODE JOB LIST1234