Chapter 1 Using the Operator Panel1-26To set the KC-GL page size, press the key, thenpress the or key until >KC-GL Page Set isdisplayed.To change the page size, press the ENTER key. Ablinking question mark (?) appears.Press the or key repeatedly until the desiredpage size (A2, A1, A0, B3, B2, B1, B0, and SPSZ)appears. When selecting SPSZ, printing will be donewith the paper size specified by the PRESCRIBESPSZ command. For details, seeProgrammingManual in the CD-ROM.Press the ENTER key to set the page set you just se-lected.Press the MENU key. The message display returns toReady.Alternative Emulation for KPDL EmulationTo use this function, It is recommended that you install expan-sion memory of 16 MB or more (total printer memory 32 MB ormore).The auto KPDL (KPDL (AUTO)) emulation enables the print-er to automatically change the emulation mode according tothe print job received. The alternative emulation can be se-lected using the operator panel. The default alternative emu-lation is PCL 6.Press the MENU key.Press the or key repeatedly until Emulationappears.Press the ENTER key. A blinking question mark (?)appears.Press the or key repeatedly until the messagedisplay KPDL (AUTO) appears.Press the ENTER key.Press the key. When > Print KPDL Errs is dis-played, press the or key. The display cyclesthrough the emulation in the following order:PCL 6 (default)KC-GLKPDLKPDL (AUTO)Line PrinterIBM ProprinterDIABLO 630Epson LQ-850Press the ENTER key. A blinking question mark (?)appears.Press the or key repeatedly until the desiredalternative emulation appears.Press the ENTER key.Press the MENU key. The message display returns toReady.Printing KPDL ErrorsThe printer can print error descriptions when printing erroroccurs during KPDL emulation. The default is Off - the print-er does not print KPDL errors.Press the MENU key.Press the or key repeatedly until Emulationappears.>KC-GL Page Set? [SPSZ]NOTEEmulationPCL 6Emulation? PCL 611121314123Emulation? KPDL (AUTO)>Alt. Emulation? PCL 6EmulationPCL 64567891012